bigbadboy
Full Member
HEMI POWER!!
Posts: 140
|
Post by bigbadboy on Apr 11, 2006 23:34:51 GMT -5
Cobalt SS > Mustang GT Theres something wrong when a four cylinder can dyno as much WHP as a V8 off the lot stock for stock... and is nitrous the only way you guys can get power? what V-8's are you talking abt?? have yet to see a N/A 4 banger to put out that much power. maybe with a turbo but thats abt it. nitrous is the shit. best power for the money that you can get.
|
|
|
Post by RoadconeTuning on Apr 12, 2006 7:33:01 GMT -5
horsepower wise a Toyota 3rd gen 3S-GE w/ VVTL-i makes just over 200hp N/A and it is a 2.0L 4 banger.... you have to respect that. the F20 and F22C motors both make roughly 240hp and continue to be some of the most efficent street engines available from the factory.
|
|
bigbadboy
Full Member
HEMI POWER!!
Posts: 140
|
Post by bigbadboy on Apr 12, 2006 13:09:28 GMT -5
ummm yea totally understand. now lets speak in terms of cars these engines comes in. lol
|
|
|
Post by RoadconeTuning on Apr 12, 2006 13:18:05 GMT -5
96-98 JDM MR2 Non-Turbo had the "BEAMS" engine 96-98 JDM MR2 Turbo had a 3S-GTE which was a 2.0L turbo I-4 that made 245 crankhp at 12psi on the "CT20b"which was an upgrade from the CT26 which was offerd here in america on the 91-95 mr2 turbos... the 89-95 JDM MR2 Turbo came w/ a Ceramic Impeller which allowed for faster spool and slightly more hp... for having never owned ANY import i think i do fairly well at this
|
|
|
Post by hoesonmyknob on Apr 13, 2006 13:26:41 GMT -5
when i bought my mustang last week i was deciding between a 05 Cobalt SS Supercharged and my 04 Mustang GT.... the Cobalt was Slower, louder, and less comfy to drive... and it cost a little more... and yes it can dyno as much as a v8 does HP wise... but people forget that hp is a calculated number which is derived from the amount of TQ that an engine makes... and the SS should put roughly 180ish down while the stang should put down 230-240ish... and you can feel everybit of it. but thats just my take on it as i enjoy both "sport compact" and "american muscle" Ehhh The Cobalt SS puts down 215-220 off the lot depending on location, temperature ect ect... But it will outdyno the GT in the HP category, Tq...no way lol
|
|
|
Post by hoesonmyknob on Apr 13, 2006 13:28:16 GMT -5
and is nitrous the only way you guys can get power? Nitrous is the best bang for the buck by far. Oh most deffenatly its the best bang for your buck, but most cars now days are running just nitrous and think they're actually doing something when they keep up with other cars that are bone stock or holding a few bolts ons lol
|
|
|
Post by RoadconeTuning on Apr 13, 2006 13:32:48 GMT -5
how is 215-220 higher than the 230-240 of a stock GT?
|
|
|
Post by hoesonmyknob on Apr 14, 2006 18:04:42 GMT -5
how is 215-220 higher than the 230-240 of a stock GT? Gt's dont dyno 240whp off the lot, its 240 Crank, if that... And thats embarassing saying that they come off the lot at 240whp. If i was ford and i had a 240whp car roll of the lot and it was that slow, i'd kick my own ass...more so if i actually baught one...
|
|
|
Post by RoadconeTuning on Apr 15, 2006 20:58:11 GMT -5
GT's are 260Crank... and the TR-3650 is a fairly efficient trans... and 260hp isnt all that much in a 3700lb car.
|
|
|
Post by dsmgsx98 on Apr 19, 2006 11:22:13 GMT -5
kyle you and i both know that you have a nice carand i dont want you to think that im cracking on it at all because im not, but when you rode with me in the MR2 and the GSX, we know that stock mustangs are not fast at all.. from a roll, or a stop. hehe. i mean AWD does help. but i wasnt putting anything over 220 awhp down. i say you should get a set of drag radials, between 100-150 shot of nitrous, and be done with it until your clutch goes out lol. and then. get a better clutch.. then spray 150 on it. you wont have a problem at all with a 100 shot with your car. and i guarantee that once you spray it. you wont stop. i mean look at me. every car ive had, ive sprayed it at least one time or another. but about the BEAMS motor... it would be siiiiick. i know where you comin from on this man.
|
|
|
Post by RoadconeTuning on Apr 19, 2006 11:54:55 GMT -5
i think ill swap a beams into a stang and yeah i know that its not that fast but its faster than what i had! so its FAST!
|
|